The “Economy” range of adaptors is offered for most everyday usage. To maintain the lowest prices, the “Economy” version is offered in Aluminium, Unpainted. Painting and Silver Plated (Brass) versions are available at extra cost. It is possible to offer improved performance specifications for narrow band options. Precision adaptors are offered to suit laboratory or test bench applications. The precision version is manufactured from brass and is silver-plated and painted with attractive, hard wearing, epoxy paint finish as standard. Each adaptor is tuned to offer the highest possible performance over
Read More
Global Invacom Waveguide (“GIW”) flexible waveguides are designed to isolate vibration, eliminate installation difficulties caused by misalignment and to provide a simple aid to positioning and alignment of antennas. Both flexible/twist and flexible are only made from a helically wound waveguide core and additional mechanical support is offered from a variety of protective jackets. GWI also manufactures a range of high performance double ridge flexible and flexible/twistable waveguides. All flexible waveguides are manufactured to the highest quality standards and Global Invacom Waveguide Ltd. is an ISO9001:2008 approved company. More information
Read More
Global Invacom Waveguide (“GIW”) offers a range of directional broad wall, side wall and cross guide couplers in 3 and 4 port configurations. All couplers have been designed to offer low VSWR, flat response and high directivity over the entire designated waveguide band. Improvements in directivity and coupling value tolerances can be made for specified narrow band applications. The CC and DC series of couplers are designed, tested and manufactured to the highest quality standards. Couplers are manufactured with the full range of International Flange Style. All Global Invacom Waveguide
Read More
Global Invacom Waveguide (“GIW”) offer a range of standard gain Horns from WG10 (WR284) to WG22 (WR28) in three values, 10dB, 15dB and 20dB. The physically larger sizes are predominantly fabricated in brass. WG16 through to WG 22 are generally electroformed in copper in order to maintain the tight tolerances for these smaller waveguide sizes. Horns are manufactured with the full range of International Flange Styles. All GIW Horns are offered with an attractive hard wearing, epoxy paint finish. More information
Read More
HUBER+SUHNER designs and manufactures an extensive product portfolio of directional and Omni directional antennas for various wireless applications in the communication, transportation and industrial markets. The HUBER+SUHNER product portfolio includes Antennas for indoor DAS, Wireless coverage for office, industrial and warehouse, RFID portal … The know-how and many years of design experience gained by HUBER+SUHNER antenna engineers allow us to provide the optimum solution for your specific requirements. Besides a wide standard product portfolio, we offer customized solutions to your need. More information Do you want to search for
Read More
Microlab owns a wide range of combiners such as WiFi combiners, LTE/cellular combiners, broadband combiners … Microlab custom designs DAS Carrier Conditioner that conveniently integrate passive components. A common example is the DAS Carrier Conditioner used at the point of interface between service providers and an In-Building Distributed Antenna system. Requirements commonly include the need to combine signals from public service channels or Tetra usually in the range from 380 to 520 MHz with cellular services extending from LTE 700 to WiMAX/LTE-2600, as well as other services up to 6
Read More
HUBER+SUHNER helps to spend less capital on assembly equipment and logistics due to its new one-stop-shopping service. Indeed, they offer ready-to-use, high performance assemblies from one single source, produced by state-of-the-art methods from carefully selected cables and connectors. Moreover, you may configure your own cable assemblies by clicking here. HUBER+SUHNER coaxial cable assemblies offer the following advantages: • precisely matching cables and connectors from the same manufacturer • manufacturing in accordance with your requirements to meet your specifications • reduced inventory – no storage of cables and connectors • no
Read More
Microlab’s low pass filters are designed to suppress harmonics and out of band noise and interference (by 55 dB and more), to improve signal quality in high power system applications and bench testing. The design used is known as rod and bead and is constructed of alternate lengths of high and low impedance transmission lines tuned to provide the proper frequency reponse. The design ensures a low loss pass band response down to at least 40% of the cut-off frequency. In the stop band rejection of at least 55 dB
Read More
Microlab is the world leader in hybrid combiners for wireless applications. Those products are all high power, low loss, high isolation and low PIM. Those combiners offers many possibilities (2×2, 3×3, 4×4, 4:2, 3:1, etc) designed for diverse applications. They are optimized for high directivity and isolation. Hybrid couplers (combiners) have the important characteristic that allows addition of two or more signals without interaction regardless of how close the frequencies of the signals may be; offering a significant advantage in this way. Indeed, this feature can often eliminate the need
Read More
HUBER+SUHNER’s high quality Lightning/EMP Protection components are available for applications in the frequency range from DC to 18 GHz. Many of their patented products have set world-wide industry standards. Their product portfolio includes protectors for almost every RF application such as all mobile communications systems and bands (GSM 900/1800, UMTS/3G, TDMA, CDMA …), wireless broadband access systems, radars, CATV and video surveillance … HUBER+SUHNER also offers data line protectors for applications like high speed data transmission from 2 to 155 Mbit/s according to ITU-T G.703 on coax. As far as
Read More